Wheel and Tyre Packages in NZ: What to Check Before You Buy

Silver Toyota Prius with custom black mag rims parked outside Mag and Turbo Waiwhakaiho.

A wheel and tyre package pairs compatible rims and tyres, but the combination still needs checking against your vehicle. Match the bolt pattern and centre bore first, then check offset and rolling diameter, and confirm clearance and balancing before fitting. Buying together reduces the risk of mismatched parts.

Why buy the wheel and tyre together?

Buying rims first can leave you chasing a tyre that fits the wheel but gives your vehicle the wrong overall diameter. The offset may also put the sidewall too close to the guard.

A package lets you check the combination before ordering. The wheel and tyre must suit each other and your vehicle; being sold together does not make them a suitable fit for every car.

What should you measure before you shop?

How do you protect the finish on Taranaki's coast?, Mag & Turbo Waiwhakaiho

Take these specifications from your vehicle's documentation or a reliable spec sheet, then compare them with the wheel you plan to fit:

  1. Match the stud pattern, or PCD, exactly. A 5x114.3 wheel and a 5x100 wheel have different bolt patterns. They are not interchangeable.
  2. Check the centre bore against your hub. A larger bore may need suitable hub-centric rings; a smaller bore will not fit over the hub.
  3. Compare the offset. It determines how far the wheel sits in or out from the hub and affects clearance inside the arch and at the guard.
  4. Match rim width to the tyre. A wider rim needs a compatible tyre and enough room inside the arch.

Wheel diameter alone is not a fitment check. Two 18-inch wheels can share a diameter and still differ in bolt pattern or offset.

How do you keep the overall rolling diameter close to factory?

If you increase rim diameter, use a lower-profile tyre to keep the total rolling diameter near the factory specification.

Reading the sidewall numbers

A tyre marked 245/45R18 has a nominal width of 245 mm, a sidewall height equal to 45 per cent of that width, and fits an 18-inch rim. Overall diameter is the rim diameter plus two sidewall heights. Moving to a 20-inch rim means reducing the sidewall height to keep the total close to stock.

Why the speedometer reads wrong

A taller wheel-and-tyre combination covers more ground per revolution, making the speedometer read lower relative to your true speed. A substantial change can also affect ABS and transmission shift logic. Check the complete tyre size, not just the rim diameter.

Will the wheel clear your guards and brakes?

Will the wheel clear your guards and brakes?, Mag & Turbo Waiwhakaiho

Most arch scrubbing comes from too little offset or too wide a rim. A wheel can look clear while parked, then rub when you turn or the suspension compresses.

Check full steering lock in both directions and clearance with the suspension loaded. Allow for suspension movement on rough roads around Mount Taranaki, not just the gap visible on a workshop floor.

Guard and caliper room

Check behind the spokes as well as around the tyre. Deep concave designs can reduce brake caliper clearance, so confirm that space before committing to a wheel.

Certification and the Warrant of Fitness

Wider or lower-offset fitments can need LVVTA certification. Tyres protruding beyond the guards can fail a Warrant of Fitness. Confirm the requirements before fitting, and keep tyre width within the approved range for the rim rather than stretching it for appearance.

Which finish will you actually keep clean?

Matte black six-spoke alloy wheel rim on a white background

Choose a finish that suits your cleaning routine. Gloss black and machined faces show chips readily; satin finishes tend to hide road grime better.

Finish or design Appearance What to check Upkeep
Gloss black and machined faces Glossy or contrasting surfaces Visible chips and stone marks Regular washing and inspection
Satin and powder-coated finishes Sheen depends on the coating Coating condition, even when grime is less obvious Regular fresh-water rinsing
Deep concave Recessed wheel face Brake caliper clearance Clean behind the spokes as well as the face

Gloss black and machined faces

These finishes make stone chips easy to spot. Check the lip and spoke edges when washing, especially if your vehicle regularly travels on loose-chip roads.

Satin and powder-coated finishes

Satin describes the sheen; powder coating describes how the coating is applied. Neither removes the need to rinse off coastal salt, even when the wheel still looks clean.

Deep concave styling

Deep concave is a styling choice, not a handling upgrade. Larger wheels with lower-profile tyres usually sharpen steering response but give a firmer ride, so weigh that against comfort on Taranaki's rough rural roads.

Compare these styles, then check fitment for your vehicle: 20x9.5 MTG Emotion in shadow tint matte grey, deep concave, 18x9 MTG Hawk in satin black, and 20x9.5 MTG Boss in gloss black, set of four.

How does finance work on a package?

Mag & Turbo Waiwhakaiho, New Plymouth can help you apply for finance through a lender. The lender sets the terms. Ask for the written terms, including any fees and repayment conditions, before signing. A repayment figure alone does not tell you the total cost. You can contact the store to ask about finance for your order.

What should you check before the fitting day?

Confirm tyre condition and assembly balancing before booking. New rims are no reason to keep tyres that are already close to their wear limit.

  1. Measure the tread depth. The Warrant of Fitness minimum is 1.5 millimetres in the principal grooves. Replace tyres close to that limit rather than transferring worn rubber onto new rims.
  2. Confirm balancing is included. Each wheel and tyre should be balanced as a complete assembly. For the difference between balancing and alignment, read our guide to wheel balance vs alignment.
  3. Arrange the fitting appointment. Use the workshop booking page.
  4. Tyres bought from Mag & Turbo Waiwhakaiho, New Plymouth get free puncture repairs and rotations for life. Through Mag & Turbo Country Wide Support, that care is also available at Mag & Turbo stores around New Zealand. Ask what the offer covers when buying. Our tyre shop guide covers tyre fitting and care in New Plymouth.

After fitting, stop driving if rubbing marks the tyre sidewall or you hear brake noise, and contact a workshop. Have vibration at speed or a noticeably incorrect speedometer checked rather than accepting either as part of the upgrade.

Does coastal salt damage wheel finishes?

Coastal salt and moisture attack a weak coating first, usually at the wheel lip and behind the spokes, where spray sits and dries. If your car sees beach runs or salty roads, inspect those spots after each trip rather than waiting for the annual check. The routine below takes a few minutes with a hose and a soft cloth.

  1. Rinse with fresh water to remove salt before it dries on the rims.
  2. Dry the wheels after rinsing.
  3. Avoid harsh alkaline cleaners and wire brushes, which can damage the finish.
  4. Check behind the spokes and around the lip for early corrosion.

Frequently asked questions

Are wheel and tyre packages pre-balanced and ready to bolt on?

Confirm balancing with the seller; a package listing alone does not establish that it is included. The fitted assembly still needs correct fastening and clearance checks on your vehicle. If vibration develops after fitting, our guide to wheel balance vs alignment explains the difference between those services.

Is it cheaper to buy rims and tyres together?

A package is not automatically cheaper. Compare the same wheels and tyres separately, with fitting and balancing costed in and any accessories added to the total. Buying together also lets you check compatibility before ordering.

Where can I buy a wheel and tyre package in New Plymouth?

The right choice depends on fitment, tyre suitability and the support included, not just the advertised price. Tyres bought from Mag & Turbo Waiwhakaiho, New Plymouth get free puncture repairs and rotations for life. Through Mag & Turbo Country Wide Support, that care is also available at Mag & Turbo stores around New Zealand. We can also help you apply for finance through a lender. Ask about coverage and finance terms before buying.

Does a wheel and tyre package need a certificate to pass a Warrant of Fitness?

Certification depends on the fitment changes, not whether the wheels and tyres were bought together. Wider or lower-offset fitments can need LVVTA certification, and tyres protruding beyond the guards can fail a Warrant of Fitness. Confirm the requirements before fitting.

How much does a wheel and tyre package cost?

Price depends on wheel size, finish and tyre choice, plus the fitting work and accessories required. Check product listings, then ask the store for a quote for your vehicle and preferred wheel size. Confirm what the quoted total includes before ordering.

Talk to us

Not sure what fits? Ask Mag & Turbo Waiwhakaiho, New Plymouth. We check fitment and fit your wheels in our New Plymouth workshop. You can browse wheels at hookmeup.co.nz, check your tyre size, or book online.